This is the point where the jack will be attached.
After unfastening and taking off the nuts, the wheel can be removed from the car. Tire service equipment like a good iron or wrench is of great aid in tightening the nuts. The wheels of the car are then loosened and it is suggested that one should always loosen the nuts in opposite pairs. The most common tools are a socket wrench/ tyre iron and a car jack. So, every car owner likes to keep some basic tools in his or her car to successfully handle the situation when the tyre gets punctured or blows out, and there is no garage house nearby. These days almost every new car that is being sold in the market is provided with the necessary tyre changing tools Hydraulic Fixture . The first thing you need to learn is to recognize which tyre is flat and which tyre is not flat. One can carry them easily in the vehicle. This is the way all professional mechanics do it.

Though there are many useful tyre changing machines available in the market, but procuring some basic tools can be very rewarding. The next important thing one cannot compromise on is the needed tools.
There are various essential things a person is required to learn when he or she starts driving. One can also put a sturdy wood slab under it once it is stopped on gravel. So, stop plaguing yourself with the thoughts about what might happen if you were left all alone in the dead of night with a damaged tyre, on an eerie road with no sight of any human being 4 kms away.
The jack is always placed on flat ground to avoid any chances of slipping. Once done you can go ahead with installing the new tyres in the car in the same way you removed the old battered tyres. Wether novice or experienced, every driver knows the importance of wheels in an automobile, and every driver is also aware that a situation might arise out of the blue where he or she would be required to change the wheels himself or herself.

This article will take you to a quick tour on how one can effectively change the tyres himself or herself without any professional help. A flat tyre usually bulges from low air pressure and it has a Tools Equipment flat appearance in comparison to any normal tyre. Once you are satisfied, you can bring the car down from the jack and tighten the nuts. Some of the important tools that every driver must have are a screw driver handle with hex, a tommy bar, a tyre lever 200 mm and a tyre lever 500mm (with boot). The car is then elevated to the reasonable height on the jack. A lot of care is taken in finding the right point because if you happen to attach the jack at the wrong point then you have to accept that you yourself damaged the bodywork and trim. As these are small in size and very portable. In case you didn't receive these tools when you procured your new marque, there are several online stores one can approach that offer these tools at very good prices. One can even use a digital tyre gauge to diagnose whether the tyre is low on air or not. These can be found in the boot or most probably with the spare tyre.

With the assistance of these tools, the first thing you need to do is to locate a point on the trim or bodywork of the tyre