The basic components of mig mag welding machineThe gas welding only uses CO2 is known as the CO2 arc welding, which is different from MAG welding. It can be divided into manual and mechanical operations according to the way of the torch moving.htm) are roughly the same, which mainly include the welding power source, wire feeder, welding torch, pneumatic systems and water systems. It is widely used in semi-automatic welding with operator has hand-held welder torch and robotic welding and automated welding filed.6 ~ 1. The welding wire is generally added with the right amount of deoxidizing elements (manganese, silicon, titanium, etc.com/ProductsType/SCR-MIG-MAG-Welding-Machine.chinaweldingmachines.6mm) wires wound into coil-shaped is automatically Ketchup Packing Machine sent to the torch through the wire feed motor, which is energized through the contact tip at the end of the torch, and produce arc among the base metals, the arc heat continuously melt with the wire Sugar Packing Machine to bond the base metals. Depending on the type of shielding gas, the gas welding machine can be divided into mag welding machine(http://www. The principle is: The welding method is to small diameter consume electrode (wire) and generates arc among the base metal, seal the surrounding with a protective gas, melting the base metal and wire.chinaweldingmachines.) to prevent the generation of pores caused by CO2 decomposition. The MAG welding uses CO2, or mix C02 in argon gas or oxygen (referred to as reactive gases).
Definition of MAG welding and MIG welding
The small diameter (0. MIG welding uses argon and helium inert gases.htm) and MIG welding. Semi-automatic welding machine power is DC power supply (it can be silicon rectifier power, thruster rectifier power supply and inverter power), which mostly has flat features or slow down (slope
The former is semi-automatic welding machine and the latter is the automatic welding machine