You will have to restore LiLo again from your Linux CD, or reinstall boot loaders such as XOSL from Windows.

If your problem persists, or if you never used a boot loader, than boot into the system from a boot floppy or the Windows CD.html</a>. Such situations can be trouble some as they leave you with very few troubleshooting options
https://www.heiner-tools.com/product/tool-holder/
One of the common problems in dual boot systems is of the boot loader getting corrupted. Note that if you use Windows 2000 or XP, boot into the recovery console and give the command fixmbr to clear the MBR.When this happens, you have to boot into the system using some other media, such as a boot floppy or the Windows Dafter booting go to the command prompt, type fdisk/mbr and press [Enter]. This clears the MBR, and makes the bootable partition C, Windows 2000 and XP users should give the command fixmbr and fixboot C: to do the same. You can also create a rescue disk for the anti virus tool and scan the system ER Collet Manufacturers using it.html" target="_blank">http://www. For example, you have a system running Windows XP and Linux using Lila as boot loader.

Prakash is Computer Hardware Expert, for more computer related articles please visit <a href="http://www. The problem is that the hard disk is detected but the OS does not load. Connect it to some other system and try to access the data if Lathe Tool you can, then your boot record is damaged.

If you still have trouble, you might have a virus on your PCs boot sector .

If nothing mentioned above seems to work.It is difficult to confirm an infection without a virus scan. Unfortunately, after you restart, it will boot to Windows directly, without any option of booting into Linux. Thesymptoms of an infections-applications slowing down or many unrecognized files appearing in the system-should give you a clue. If Lila gets corrupted, you can not boot into either OS.articles-hub.articles-hub. For example Windows 98 and Me users might see a message during boot up that says, No valid FAT on boot drive this is caused due to a boot sector virus called stoned Monk. Then restart the system to boot into the OS. One fine day you start your PC and get messages that say,Book Disk failure. Even reinstalling Windows might give you an error message that says, Your computer already has an operating system installed. Then you have a serious problem at hand.com/Category/13. Then best solution is to connect the hard disk to another system, and scan with an anti virus tool. Go to the command prompt and give the command fdisfk/mbrand then give the command sys C.com/Category/13.Windows 2000 and XP users should boot into the recovery console. Otherwise the service center beckons. The system may get stuck in the second screen during the booting process or the OS might display an error message and refuse to load