Make sure you press the gauge snugly on the valve.Correct tire pressure varies from vehicle to vehicle and wheel to wheel.To maintain the proper air pressure in your tires takes very little effort. A sight inspection is not an appropriate way to measure the air pressure in your tires.How to measure and correct tire pressure:Step 1:First and foremost you need a tire pressure gauge.Step 4:Remove the top or cap from the valve on the tire and insert the gauge onto the valve.

This informational sticker is found in standard places on your car. It is estimated that a 4% savings equates to between $100 and $200 per year. Once it is seated properly you can note the reading on the gauge.Step 6:Repeat this same step by step procedure for the other tires. In fact, the recommended pressure for personal vehicles ranges from 20 to over 50 psi.The pressure listed on the tire sidewall is the maximum tire pressure - or the tire pressure that is required to carry the maximum load of the tire.

Checking once gate valve suppliers a month will assure that you are maintaining the correct pressure all year round.It is recommended that you check your tire pressure at least once per month.When you find the information listing the correct tire pressure, you need to physically measure air pressure in all four tires to guarantee they are inflated properly.

You don't need an expensive gauge.Step 2:Find the recommended inflation pressure for your tires on the vehicle information placard.The proper tire inflation amount is usually found on a tire information sticker mounted somewhere on your car. Air can and will leach from a tire over time. Air pressure should only be measured when tires are cold. It only takes one low tire to rob you of fuel economy, so you need to measure all the tires. There are a few steps involved in doing this correctly.