Visit Novamen Inc. Operating in Alberta, Novamen Inc.• Type II liquids contain a polymer-based thickening agent drive pulley manufacturers that allows them to stay longer on the surface and thus, provide extended protection. They also act as anti-icers.• Type III fluids have properties that lie somewhere between Type I and Type II. These liquids are considered as anti-icers. Some countries around the world have used them for years to deal with ice in the aviation industry, mining and industrial markets. A quick and effective way to get around the problem is to use anti-icers and de-icers. These liquids are best for slower aircrafts. It includes an approved corrosion inhibitor and a leaching inhibitor.• Type IV liquids are same as the Type II liquids but they last longer than any of the other types.

These products are generally made of Potassium Acetate, Ethylene Glycol or Propylene Glycol with added corrosion inhibitors.• They can be used for both anti-icing and de-icing measures. They are dyed green for easier identification. These liquids have extended usage features and are also environmentally friendly. These liquids are regularly used for airplane and runway de-icing.• Generate less corrosion than any other de-icing method. These liquids are considered as de-icers as they are heated and then sprayed at a high pressure on the surface to remove the ice. They work better with larger aircraft, as these planes can reach the higher speeds necessary for breakdown of the viscosity in the liquid. De-icing liquids are categorized into four different classes:• Type I liquids have a low viscosity quotient and thus, are not as thick as the others.

This de-icer is an excellent alternative to traditional rock salt.Liquid de-icers and anti-icers provide certain benefits:• De-icers like calcium and magnesium chloride are environmentally friendly. The primary reason why these liquid de-icers are so popular is because they act quickly. They are dyed light yellow for ease of identification.• Brine De-icers: These are salted in a liquid form made using calcium and magnesium chloride. focus is primarily to industrial, oil, natural gas and mining industries throughout Canada.. Type I liquids are dyed orange for easier identification.Nowadays, enhanced de-icers and brine de-icers are also used for deicing:• Enhanced De-icers: These de-icers include a pre-wet sodium chloride made from a special magnesium chloride formula. This, in turn, means they provide short-term protection against snow since they flow off the surface more quickly than the other types