For example, the output energy is higher for quad flash compared to single flash. Professional manufacturers usually make these strobe lights as per the certified standards and this proves to be a good check to make sure your lights are indeed safe and well designed. Some beacons are in fact as light as 3lbs and can be easily attached to the roof of the emergency vehicle whenever required. You can go for strobe lights or beacons depending upon your lighting and mounting requirements. There are multiple size options for light heads as well as for beacons. 10 � 15 inch power cords are provided in sets of 2 or 4 in strobe kits along with a cigarette lighter plug and adapter. The output varies though, with the flash patterns and flashing rates. Polycarbonate base is also used in CCTV Power Supplies some cases for reliable encapsulation. Most strobe bars and beacons are designed with a low profile. The light circuits don’t draw excessive current and if you are using LEDs, peak currents are usually lower than 5 Amperes. Some strobe lights are designed to be aerodynamically efficient and don’t produce any noise or sound even on speeding vehicles. A high quality strobe light can function with a 12V DC power supply and still give you about 18 joules output. The portable nature of these lights is due to their lightweight structure and ease of installation.

If you are purchasing a strobe light, you have to make sure it meets the Video Baluns Suppliers SAE requirements for Class 1, 2 or 3. Usually the base of these lights is made of die cast aluminum that helps in efficient thermal management. Push button switches are also provided for simple operation and for easily turning them on or off. In fact, the slim design of these light bars carrying strobes makes them easily concealable and ideal for stealth operations.
A high quality strobe light could be used in many different circumstances for emergency lighting as well as for sending warning signals.

A good strobe light kit comes with pull magnets which can take a weight of around 60 lbs. Shielded power cables and interconnect harness are provided with the strobe lights in order to easily install and make the connections.
This is sufficient as most strobe lights are far lighter than 30lbs. Moreover, aluminum lends structural strength to the strobe lights preparing them for heavy duty handling and durability in spite of rugged usage.

Luminosity is a very important factor when you want emergency lights. Together aluminum and polycarbonate can protect strobe lights from vibration as well as moisture, thus enhancing the effectiveness as well as life span of the warning lights. Some light bars fixed with strobes are so slim that they can be installed anywhere and in any direction for efficient light visibility. They are therefore mounted on unmarked vehicles for emergency lighting. You can go for permanent mounting of these lights or temporary mounting where you can frequently dismantle them, pack them and use wherever required.