Syringes produced by syringe moulds are widely used in daily life. We use them every time we go to the hospital. In a rapidly developing society, the medical field is also developing rapidly, and the production of medical moulds is becoming more and more extensive.

Design of cooling system for syringe mould

The design of the cooling system is a relatively complicated task, that is, the cooling effect and the uniformity of the cooling must be considered, and the influence of the cooling system on the overall structure of the mould must be considered. The specific location and size of the cooling system must be determined; key parts such as moving moulds Or the cooling of inserts; the cooling of side sliders and side cores; the design of cooling elements and the selection of cooling standard elements. Syringe mould company began to analyze these series of problems when the mould was designed. The mould uses circulating water to flow in each part of the mould, which reduces the cooling time during injection, improves product production efficiency, and greatly reduces production costs.

The syringe mould is non-toxic, sterile, high-gloss, and medical plastic according to the needs of the syringe. For these requirements, it is necessary to choose a suitable quenched steel. The second syringe needs to be sealed, and the processing size of the mould is controlled to be within 0.03 mm. The injection mould company has self-inspection on the finished workpiece, re-inspection according to the 3D drawing, and reports according to the measurement point. First, the QC department supervisor inspects it, and then re-inspects it in the project department. To the assembly shop.


As people pay more and more attention to health, the market demand for Syringe Mould is growing. Yuhuan Shengjiu Mould Co., Ltd. makes these uses of medical mould more with its superb technology. We are a professional syringe mould manufacturer and syringe mould supplier in China. Welcome to buy: https://www.medicalmould.net/