Injection mould processing and manufacturing is actually very important in real life. Perhaps most people are most concerned about some manufacturing steps. So what are the steps in the actual process?



1. In the process of injection mould processing and manufacturing, you will find that before the mould design, the designer should fully analyze the existing product situation, and must consider the actual effect of the entire product, we have to take a look at the current situation combined with the actual situation Whether plastic products conform to the principles of injection mould processing, and at the same time, during the processing process, we also need to look at their needs and the geometry and dimensional accuracy of the designer during the entire product manufacturing process, as well as the appearance requirements, in this case We have to carry out the necessary discussions and try to avoid unnecessary complexity in the mould manufacturing process.



2. In the process of injection mould processing and manufacturing, it is necessary to consider the mould structure design. Generally speaking, there is a set of high-quality moulds, and not only need to have good processing equipment, but also have skilled mould manufacturing workers, which is also very important. The factor is that it is best for us all to have good mould design, especially for the quality of complex mould mould design, which occupies more than 80% of the mould quality. An excellent mould design itself is more likely to meet the premise of satisfying customers. Their cost performance is relatively low, and the difficulty of processing is gradually reduced, and the processing time will be gradually shortened.



Therefore, after mastering this point, it is recommended that you better understand more about the entire injection mould processing and manufacturing process. We basically need to understand each detail of each mould design and fully understand the use of each mould part. In the design process, please refer to the previous design, and to understand their mould processing or product production process, to learn from the experience and lessons, and to understand more about the entire injection mould workflow, and deepen the injection mould Relationship, we must understand the processing technology of all products, understand the characteristics and limitations of each product processing, and understand the results of mould design.



3. In the process of injection mould processing and manufacturing, it is recommended that everyone be able to determine the mould material and standard parts. We will then perform mould processing. When selecting, we must consider the actual selection effect of the existing mould materials. In the selection process, in addition to In addition to considering the accuracy and quality of the product, it is necessary to give the correct choice in combination with the actual processing and heat treatment capabilities of the mould manufacturer. In addition, it is necessary to effectively shorten the manufacturing cycle and use the existing standard parts for processing as much as possible. .



4. In the process of injection mould processing and manufacturing, in addition to the best structure and reasonable tolerance distribution in the design process, the processing of parts and assembly of the mould is also crucial, so the processing accuracy The choice of processing method occupies an absolute dominant position in the entire mould manufacturing process. The manufacturing error of the mould is basically about 1/3, so the error caused by the wear of the mould is almost 1/6, and these errors are all What we should pay attention to in the ordinary time, it is recommended that you choose a regular manufacturer such as Xubang for processing, so as to effectively avoid errors and achieve the desired effect.



Yuhuan Shengjiu Mould Co., Ltd. is a professional China supplier of Medical Mould . The leader in the production, design, development, manufacturing, and testing of its own moulds mainly produces and supplies medical syringes, safety needle moulds, oxygen mask moulds, needle-free injection takeovers, Vaginal Speculum Mould and other medical mould products. Safe, fast, and simple needle-free injection site products are suitable for medical Needleless Injection Site applications. Welcome to consult and order: https://www.medicalmould.net/