All use their car stereo to have a pleasant and nice road drive. Listening to music will also reduce the tension while driving and makes it a tension less drive. But when a CD gets stuck in the drive it creates a screw and barrel for plastic extruder machine nuisance to the driver and also annoying. Removal of it is a must. But how to remove a stuck CD in a car stereo?

There are few cases where CD gets stuck in the drive and doesn't come out. In such case there exist a problem in the ejection system of the drive which makes the CD get stuck in the drive itself. Warping also is one of the reason for such stuck up of CD in the drive.

The removal of a stuck CD from the drive the drive is an easy process comparing to the other operations in the car stereo. One can remove it in a fairly easier way. But if one feels that they might damage the drive in an attempt to remove the stuck CD, they can approach a car service station where the person will be well versed in removing the CD and it will be quiet easy for him to accomplish the task.

There are few tools required for removal of the stuck CD. It includes screw driver, paper clip and needle nose pliers. A paper clip is used to manually elect the CD. In a place under the CD directly there will be a hole of paper clip size. A paper clip is sent in through this hole and pressed gently. This will allow the CD to come out even if the player is damaged.

When the first step doesn't work out another step is carried out. In this step a needle nose pliers can be used. The pliers are used to hold the CD inside the players and it is gently pulled out. The CD if held properly will come out without damaging the player.

If the pliers are not held carefully there is a risk of damage to the CD. This method turns out to be successful if the paper clip method doesn't work out. If one is ready to replace the CD after removal he can very well go for this type of removal.

If the nose plastic extruder screw and barrel pliers method also doesn't work out one must go on for the third step that is by using a screw driver. Using a screw driver unscrew the screws of the CD player. If possible remove the dash board of the car. Any screw on the top and bottom of the player is removed and hence the CD player is removed completely. Now the CD can be removed. After removing place the CD player in its initial position and using a screw driver again re install all the screws of the CD players.

To avoid a tiresome journey one needs a proper player and should know how to remove a stuck CD in a car stereo for which the above steps will be helpful.