2017年6月27日(火)
There are various benefits of using LED
<p>A study has shown that CREE LED flashlights are able to reduce up to 62% of the power demands.<br />
<br />
As a result, having a rechargeable power source like rechargeable batteries and a charger is a great idea.<br />
<br />
And while some electronics suppliers are able to provide it not all do so.<br />
<br />
- CREE LED uses the technology called solid-state technology, which allows effective dimming and hence eliminated flickering Spotlight Company
of light.<br />
<br />
- CREE LED can be used for producing flashlights, which are environment-friendly, energy-efficient and hence reduce the costs of maintenance and save your bills.<br />
<br />
- CREE LED flashlights do not contain any harmful material such as mercury and hence it is safer to use.<br />
<br />
So what's the big deal about CREE LED flashlights anyway<br />
<br />
There are various benefits of using LED flashlight bulbs manufactured by CREE.<br />
<br />
- The quality of light produced by CREE LED is higher as compared to the traditional incandescent light bulbs and bulbs produce the colored light as well.<br />
CREE and LED flashlights have revolutionized the industry, unfortunately that hasn't extended to batteries and how they're powered. You cannot predict when they are going to finish, and sometimes they finish in the middle of some important work, which can be little frustrating.<br />
<br />
While buying LED flashlight, remember to ask for the rechargeable batteries and charger with it. This is because of the reason that most of the energy consumed by incandescent light bulbs raises the LED Light Housing
heat and hence the surface of torch becomes hot.<br />
<br />
<br />
.<br />
<br />
- CREE LED uses up to 85% of the energy consumed by traditional incandescent light bulbs.<br />
<br />
Unfortunately, unlike incandescent bulbs the batteries for LED flashlights need to be replaced before before they have even worn out.<br />
<br />
While this is not the end of the world it can prove vexing for resellers, with customers being so picky about getting a fully-working gadget will all the necessary accessories.<br />
<br />
So, whenever you are shopping for new LED flashlights sources it is important to ask that you will be getting everything you need. Let us discuss some of these advantages in detail. If you are planning to buy a LED flashlight, you must do research online to find out the best deal.<br />
<br />
- CREE LED flashlights are able to save significant amount of energy, because they last for longer time as compared to traditional incandescent light bulbs, and hence wastage of energy is negligible</p>
<br />
As a result, having a rechargeable power source like rechargeable batteries and a charger is a great idea.<br />
<br />
And while some electronics suppliers are able to provide it not all do so.<br />
<br />
- CREE LED uses the technology called solid-state technology, which allows effective dimming and hence eliminated flickering Spotlight Company

<br />
- CREE LED can be used for producing flashlights, which are environment-friendly, energy-efficient and hence reduce the costs of maintenance and save your bills.<br />
<br />
- CREE LED flashlights do not contain any harmful material such as mercury and hence it is safer to use.<br />
<br />
So what's the big deal about CREE LED flashlights anyway<br />
<br />
There are various benefits of using LED flashlight bulbs manufactured by CREE.<br />
<br />
- The quality of light produced by CREE LED is higher as compared to the traditional incandescent light bulbs and bulbs produce the colored light as well.<br />
CREE and LED flashlights have revolutionized the industry, unfortunately that hasn't extended to batteries and how they're powered. You cannot predict when they are going to finish, and sometimes they finish in the middle of some important work, which can be little frustrating.<br />
<br />
While buying LED flashlight, remember to ask for the rechargeable batteries and charger with it. This is because of the reason that most of the energy consumed by incandescent light bulbs raises the LED Light Housing

<br />
<br />
.<br />
<br />
- CREE LED uses up to 85% of the energy consumed by traditional incandescent light bulbs.<br />
<br />
Unfortunately, unlike incandescent bulbs the batteries for LED flashlights need to be replaced before before they have even worn out.<br />
<br />
While this is not the end of the world it can prove vexing for resellers, with customers being so picky about getting a fully-working gadget will all the necessary accessories.<br />
<br />
So, whenever you are shopping for new LED flashlights sources it is important to ask that you will be getting everything you need. Let us discuss some of these advantages in detail. If you are planning to buy a LED flashlight, you must do research online to find out the best deal.<br />
<br />
- CREE LED flashlights are able to save significant amount of energy, because they last for longer time as compared to traditional incandescent light bulbs, and hence wastage of energy is negligible</p>
2017年6月26日(月)
From the main house and LED lighting
From the main house and LED lighting production enterprises in the industrial chain of distribution look, nearly 80% of the enterprise focus on devices and integrated application in the middle and lower reaches of the link, and enterprise scale slant generally small. In the first half of this year, the LED lighting industry production enterprise common achieve output of 3. The lack of product standards affect the healthy development of the market, the market LED lighting products and the good and bad are intermingled, inferior quality and cheap products often benefit in bidding, serious damage quality products enterprise development confidence.We primarily supply: LED light tube, LED panel lights, LED down lights, LED tube lighting, and LED fluorescent lamp. Enterprise representatives suggested to public lighting field as a breakthrough form the government leading, market operation, collaborative division of labor, complementarily promote LED lighting product promotion application system, and guide enterprises to speed up the implementation of LED lighting energy saving reconstruction...<br />
<br />
Shenzhen Gleming Photoelectric Technology Co.<br />
Proposal to set up a complete supporting industrial chain<br />
As the technology capital intensive, and material resources consumption, energy saving and consumption reduction effect, good comprehensive benefit of emerging industry, LED lighting industry to speed up the economic structure adjustment, the development of creative economy, promote the energy conservation and emission reduction process, to have the positive role. is one of The LED lighting products supplier in Shenzhen City.6 billion yuan, a year-on-year increase of 20%, higher than the growth of Suzhou manufacturing emerging industry 10%. Before the symposium, the municipal federations of industry and commerce organization related enterprises and experts is the LED lighting industry present situation investigation, and the industry present situation and restricting factors are fully analyzed.<br />
<br><br>. The whole city about 80% of the power type LED chip still needs to import from abroad and Taiwan. As we have learned, at present in addition to tube lights and shoot the light, but other LED lighting products are lacks of complete standard industry standard.<br />
Have expert proposal, the government should strengthen the industry development planning guide: coming up with the LED lighting industry development special planning; To speed up the cultivation industry development base, a technology research center, set up a special guide capital and industrial investment funds, and constantly improve the industrial development of the carrier construction; To speed up the construction of industry chain, in view of the industry chain each link speed up the development of LED lighting industry key projects, the construction of more complete supporting industry chain, each link foster home occur with certain scale leading demonstration enterprise; Encourage industrial optimization layout, speed up the gathering area construction, enhance the scale accumulative effect; Encourage the LED lighting industry organization, to formulate LED lighting products of regional industry standard.<br>
Light emitting diode (LED) than the traditional light source energy saving nearly 80%, and long service life, is the urban lighting "main force", but lack of product standards have restricted the development of the industry of the important reasons.<br />
On the occasion of the symposium, LED lighting products enterprise represents a hope the government increased the supporting strength, formulate energy-saving new technology to contribute to the policy, the Guangdong, Shanghai and other provinces and cities has already issued a series of supportive measures.<br />
Question the inferior quality and cheap products contusion quality enterprise<br />
In recent years, the LED lighting industry rapid rise last year, sales more than 6 billion yuan, accounting for the LED industry 14%, become the stable growth promoting the transformation of a big window. At present, our city has LED lighting products production enterprise 102, already open patent filings reach 2240 pieces, LED patent licensing 1182, ranked the forefront of the large and medium-sized cities.<br />
Welcome to negotiate. Municipal party committee standing committee, minister of the united front ZhouXiangQun, vice chairman of the CPPCC, municipal federations of industry and commerce chairman YaoDongMing and attend the symposium. Yesterday in the city association of industry and commerce at the ascending Suzhou LED lighting industry development level Suggestions forum, from the LED lighting products production enterprise's representative and relevant experts positive ", suggest the government to strengthen the policy support dynamics, the industry organization study and establish regional industry standard.<br />
To further realize the large-scale development, the LED lighting industry is faced with many restricting factors and market challenges. On the occasion of the symposium, focusing on how to improve the LED lighting industry present situation, further enhance the development of the industry level, the experts and enterprise representatives speak freely.<br />
Secondly, the LED lighting products, to edison bulb lamp
the Linsheng Electrical Co., Ltd.
detriment of the absence of standard form the fair competition of the market mechanism.<br />
First, the enterprise overall in the middle and lower reaches of industry chain and industry core competitiveness., Ltd
<br />
Shenzhen Gleming Photoelectric Technology Co.<br />
Proposal to set up a complete supporting industrial chain<br />
As the technology capital intensive, and material resources consumption, energy saving and consumption reduction effect, good comprehensive benefit of emerging industry, LED lighting industry to speed up the economic structure adjustment, the development of creative economy, promote the energy conservation and emission reduction process, to have the positive role. is one of The LED lighting products supplier in Shenzhen City.6 billion yuan, a year-on-year increase of 20%, higher than the growth of Suzhou manufacturing emerging industry 10%. Before the symposium, the municipal federations of industry and commerce organization related enterprises and experts is the LED lighting industry present situation investigation, and the industry present situation and restricting factors are fully analyzed.<br />
<br><br>. The whole city about 80% of the power type LED chip still needs to import from abroad and Taiwan. As we have learned, at present in addition to tube lights and shoot the light, but other LED lighting products are lacks of complete standard industry standard.<br />
Have expert proposal, the government should strengthen the industry development planning guide: coming up with the LED lighting industry development special planning; To speed up the cultivation industry development base, a technology research center, set up a special guide capital and industrial investment funds, and constantly improve the industrial development of the carrier construction; To speed up the construction of industry chain, in view of the industry chain each link speed up the development of LED lighting industry key projects, the construction of more complete supporting industry chain, each link foster home occur with certain scale leading demonstration enterprise; Encourage industrial optimization layout, speed up the gathering area construction, enhance the scale accumulative effect; Encourage the LED lighting industry organization, to formulate LED lighting products of regional industry standard.<br>
Light emitting diode (LED) than the traditional light source energy saving nearly 80%, and long service life, is the urban lighting "main force", but lack of product standards have restricted the development of the industry of the important reasons.<br />
On the occasion of the symposium, LED lighting products enterprise represents a hope the government increased the supporting strength, formulate energy-saving new technology to contribute to the policy, the Guangdong, Shanghai and other provinces and cities has already issued a series of supportive measures.<br />
Question the inferior quality and cheap products contusion quality enterprise<br />
In recent years, the LED lighting industry rapid rise last year, sales more than 6 billion yuan, accounting for the LED industry 14%, become the stable growth promoting the transformation of a big window. At present, our city has LED lighting products production enterprise 102, already open patent filings reach 2240 pieces, LED patent licensing 1182, ranked the forefront of the large and medium-sized cities.<br />
Welcome to negotiate. Municipal party committee standing committee, minister of the united front ZhouXiangQun, vice chairman of the CPPCC, municipal federations of industry and commerce chairman YaoDongMing and attend the symposium. Yesterday in the city association of industry and commerce at the ascending Suzhou LED lighting industry development level Suggestions forum, from the LED lighting products production enterprise's representative and relevant experts positive ", suggest the government to strengthen the policy support dynamics, the industry organization study and establish regional industry standard.<br />
To further realize the large-scale development, the LED lighting industry is faced with many restricting factors and market challenges. On the occasion of the symposium, focusing on how to improve the LED lighting industry present situation, further enhance the development of the industry level, the experts and enterprise representatives speak freely.<br />
Secondly, the LED lighting products, to edison bulb lamp


First, the enterprise overall in the middle and lower reaches of industry chain and industry core competitiveness., Ltd
2017年6月24日(土)
Accordingly, interchangeable LED bulbs and a light
<p>Usually a resistor must be selected based on both LED electrical characteristics and 100W Led Heatsink
the number of light modules connected in a light string, so that nominated current will flow through the LED bulb. The number of light modules that are connected together in series would be selected such that the sum of the minimum operating voltage for each of the light module is less than the voltage available to supply the string. Such light strings are usually formed from a plurality of LEDs connected in series, where the LEDs may have different colors.<br />
<br />
Accordingly, interchangeable LED bulbs and a light module therewith are provided in the present invention to ensure the light string formed from such interchangeable bulbs and light modules are not only reliable in terms of functioning, but also flexible in terms of free choice of color change for a light module<br />
<br />
According to another aspect of the present invention, a resistor should be selected such that the current flow through the LED in an interchangeable LED bulb is less than the maximum current of the LED.<br />
<br />
LEDs have increasingly been used as luminance sources in various applications. Usually a resistor must be selected based on both LED electrical characteristics and the number of light modules connected in a light string, so that nominated current will flow through the LED bulb.<br />
<br />
This invention relates to a type of interchangeable LED bulb, and to a light module assembled by connecting two interchangeable LED bulbs in parallel and with the same polarity, and further to a light string assembled by connecting such light modules together in series. The actual power consumption of a resistor must be less than its maximum power consumption. In addition to other desirable features, the availability in a variety of colors makes LEDs very attractive and suitable for decoration purposes. That is why LED strings currently available in the market have LED bulbs molded together with the lampholders and thus making it impossible to replace any bulbs without cutting off the electrical wires. As a result, the whole string will usually be disposed if one failing LED causes the string to become dark.<br />
<br />
A disadvantage of this configuration is the inability to provide a unrestricted choice of color in replacing LED bulbs within a light string. Otherwise, normal illumination can not be ensured for every bulb. In an extreme case, one LED conducts all current while the other one has no current flowing through it.<br />
<br />
According to another aspect of the present invention, a resistor should be selected such that the current flow through the LED in an interchangeable LED bulbs are less than the maximum current of the LED. When two LEDs of different colors are connected in parallel and with the same polarity, but with no other electrical elements, the one with a lower threshold forward voltage will conduct current first and usually take more current than the other one that has a higher threshold forward voltage.<br />
<br />
In another configuration of forming a light module, two LEDs are connected in parallel and with the same polarity, but with no other electrical elements; similar light modules are then connected in series to form a light string. The actual power consumption of a resistor must be less than its maximum power consumption. It is unacceptable that some light bulbs are illuminating while others are dark in a light string.<br />
<br />
The disadvantage of such series configuration is that, the whole light string Will turn dark if one of the LEDs in the string burns open or is somehow disconnected from the string; and it is a time consuming task in identifying the faulty one among many good but unlighted LEDs. As a result, an LED bulb of one color can not be used for replacing an LED bulb of another color, even though the lampholder shall allow and accommodate such replacement activities. Therefore, it is a common practice that two substantially similar LEDs, which have the same electrical characteristics; and usually have the same color, must be selected for the parallel connection to form a light module. Reliability of the light string is improved, as with the parallel configuration, when one light bulb burns open, the other bulb in Spotlight
parallel will still keep current flowing through the string, provided that it has the capacity of conducting all current flowing through a light module. Only the faulty bulb will become dark and all other bulbs in the string will stay lit, so it is easy to identify the failing bulb and replace it. As a result, one application where LEDs become particularly popular in recent years is decorative light strings.<br />
<br />
According to yet another aspect of the present invention, a plurality of such light modules is connected together in series to provide a string of such light modules. We know LEDs are made of different semiconductor materials which have different ranges of emitted light wavelength and different electrical characteristics. For example, the minimum operating voltage of a light module may be the greater of the minimum operating voltage of the two LEDs.<br />
</p>

<br />
Accordingly, interchangeable LED bulbs and a light module therewith are provided in the present invention to ensure the light string formed from such interchangeable bulbs and light modules are not only reliable in terms of functioning, but also flexible in terms of free choice of color change for a light module<br />
<br />
According to another aspect of the present invention, a resistor should be selected such that the current flow through the LED in an interchangeable LED bulb is less than the maximum current of the LED.<br />
<br />
LEDs have increasingly been used as luminance sources in various applications. Usually a resistor must be selected based on both LED electrical characteristics and the number of light modules connected in a light string, so that nominated current will flow through the LED bulb.<br />
<br />
This invention relates to a type of interchangeable LED bulb, and to a light module assembled by connecting two interchangeable LED bulbs in parallel and with the same polarity, and further to a light string assembled by connecting such light modules together in series. The actual power consumption of a resistor must be less than its maximum power consumption. In addition to other desirable features, the availability in a variety of colors makes LEDs very attractive and suitable for decoration purposes. That is why LED strings currently available in the market have LED bulbs molded together with the lampholders and thus making it impossible to replace any bulbs without cutting off the electrical wires. As a result, the whole string will usually be disposed if one failing LED causes the string to become dark.<br />
<br />
A disadvantage of this configuration is the inability to provide a unrestricted choice of color in replacing LED bulbs within a light string. Otherwise, normal illumination can not be ensured for every bulb. In an extreme case, one LED conducts all current while the other one has no current flowing through it.<br />
<br />
According to another aspect of the present invention, a resistor should be selected such that the current flow through the LED in an interchangeable LED bulbs are less than the maximum current of the LED. When two LEDs of different colors are connected in parallel and with the same polarity, but with no other electrical elements, the one with a lower threshold forward voltage will conduct current first and usually take more current than the other one that has a higher threshold forward voltage.<br />
<br />
In another configuration of forming a light module, two LEDs are connected in parallel and with the same polarity, but with no other electrical elements; similar light modules are then connected in series to form a light string. The actual power consumption of a resistor must be less than its maximum power consumption. It is unacceptable that some light bulbs are illuminating while others are dark in a light string.<br />
<br />
The disadvantage of such series configuration is that, the whole light string Will turn dark if one of the LEDs in the string burns open or is somehow disconnected from the string; and it is a time consuming task in identifying the faulty one among many good but unlighted LEDs. As a result, an LED bulb of one color can not be used for replacing an LED bulb of another color, even though the lampholder shall allow and accommodate such replacement activities. Therefore, it is a common practice that two substantially similar LEDs, which have the same electrical characteristics; and usually have the same color, must be selected for the parallel connection to form a light module. Reliability of the light string is improved, as with the parallel configuration, when one light bulb burns open, the other bulb in Spotlight

<br />
According to yet another aspect of the present invention, a plurality of such light modules is connected together in series to provide a string of such light modules. We know LEDs are made of different semiconductor materials which have different ranges of emitted light wavelength and different electrical characteristics. For example, the minimum operating voltage of a light module may be the greater of the minimum operating voltage of the two LEDs.<br />
</p>
2017年6月23日(金)
You are searching for the right LED light?
he main advantage of these led-lamps is definitely the huge saving of energy up to 90 %. But the nuclear phaseout causes that our electric current will get more expensive.<br />
Warmwhite for use in your living room oder your bedroom.<br />
Light up your home with LED Spotlight Company
Lights by led-light-24<br />
<br />
You are searching for the right LED light? led-light is selling many different kinds of led lights. But the led lamps do not only save energy, they even have a much higher economic life time up to the extend of 50.<br />
Today the light of these led lamps is bright, warm and virtually indistinguishable to conventional lamps. No quicksilver and no posion gases are neede. Coolwhite light is mostly preferred for modern kitchens or floors. This is the right time to buy and use led lamps instead of normal light bulbs and poisonous energy saving lamps<br />
<br />
One of these ways of energy conservation is to change conventional halogen lights into led-lighting, such as these groundbreaking led lamps.000 hours. LED bulbs are energy saving and the lifetime is up to 50. You can choose between many different led lamps with base GU10, MR16, E27 and E14. But mainly the lightcolor depends on your taste. With led lamps it is easy to protect your environment and save money on your energy bill.<br />
<br />
In the product line of elba-elektronik these led lamps are an absolute bestseller not only because of the mentioned advantages but also because of the fact that these led lamps, led-lighting in general, get only lukewarm when they are at work no fire danger no matter where the led lamps are used.<br />
If you are searching for an alternative product to replace the old energy saving lamp with mordern LED light you will find the right product in best quality in our online led light store at led-light-24<br />
<br />
LED Light has many advantages compared to a normal edison light bulb.<br />
Use LED lamps to Emergency Light Manufacturers
replace your old energy scuffing lamps<br />
<br />
The nuclear catastrophe of Fukushima cleared the way out of the nuclear power straight to the making of electric current by renewable energy. This is the right time to buy and use led lamps instead of normal light bulbs and poisonous energy saving lamps<br />
<br />
<br />
. There are no posion materials inside a led lamp.<br />
In the past led lamps had only a dark light, and the light these led lamps spent was very very flashy.<br />
Energy is getting more and more expensive.000 hours. The RGB strip is easy to install and generates a wonderful ambiance with different light functions. With these items you can have different colors of led light at your home by controlling the color of the leds with a remote control.<br />
Energy is getting more and more expensive.<br />
Led-light-24.<br />
There are different colors of the led lights.000 hours.com is also selling led strip with RGB color change.<br />
<br />
much higher economic life time up to the extend of 50.<br />
In the past led lamps had only a dark light</p>
<p> </p>
Warmwhite for use in your living room oder your bedroom.<br />
Light up your home with LED Spotlight Company

<br />
You are searching for the right LED light? led-light is selling many different kinds of led lights. But the led lamps do not only save energy, they even have a much higher economic life time up to the extend of 50.<br />
Today the light of these led lamps is bright, warm and virtually indistinguishable to conventional lamps. No quicksilver and no posion gases are neede. Coolwhite light is mostly preferred for modern kitchens or floors. This is the right time to buy and use led lamps instead of normal light bulbs and poisonous energy saving lamps<br />
<br />
One of these ways of energy conservation is to change conventional halogen lights into led-lighting, such as these groundbreaking led lamps.000 hours. LED bulbs are energy saving and the lifetime is up to 50. You can choose between many different led lamps with base GU10, MR16, E27 and E14. But mainly the lightcolor depends on your taste. With led lamps it is easy to protect your environment and save money on your energy bill.<br />
<br />
In the product line of elba-elektronik these led lamps are an absolute bestseller not only because of the mentioned advantages but also because of the fact that these led lamps, led-lighting in general, get only lukewarm when they are at work no fire danger no matter where the led lamps are used.<br />
If you are searching for an alternative product to replace the old energy saving lamp with mordern LED light you will find the right product in best quality in our online led light store at led-light-24<br />
<br />
LED Light has many advantages compared to a normal edison light bulb.<br />
Use LED lamps to Emergency Light Manufacturers

<br />
The nuclear catastrophe of Fukushima cleared the way out of the nuclear power straight to the making of electric current by renewable energy. This is the right time to buy and use led lamps instead of normal light bulbs and poisonous energy saving lamps<br />
<br />
<br />
. There are no posion materials inside a led lamp.<br />
In the past led lamps had only a dark light, and the light these led lamps spent was very very flashy.<br />
Energy is getting more and more expensive.000 hours. The RGB strip is easy to install and generates a wonderful ambiance with different light functions. With these items you can have different colors of led light at your home by controlling the color of the leds with a remote control.<br />
Energy is getting more and more expensive.<br />
Led-light-24.<br />
There are different colors of the led lights.000 hours.com is also selling led strip with RGB color change.<br />
<br />
much higher economic life time up to the extend of 50.<br />
In the past led lamps had only a dark light</p>
<p> </p>
2017年6月22日(木)
LED's have changed dramatically over the past few years
This means that the battery in a LED torch will last a lot longer than in a xenon or halogen torch. Such are the green light on your monitor, which tells you it is on.
LED's have changed dramatically over the past few years.
I was looking for a good torch to add to my tool collection, and after looking at the Maglite range with their LED conversion kits I found the Led Lenser. It should be noted that high-power (&Emergency Light Manufacturers
8805; 1 Watt) LEDs are necessary for practical general lighting applications.
For years, traditional incandescent bulb flashlights have provided limited illumination, dark spots and lighting for only short periods of.
An LED is a special type of diodes that emit light when power is running through them. If you have looked around for a torch recently you will have noticed the Spotlight
current buzz in the world of torches is the LED Lenser.
The LED Torch has truly revolutionized portable lighting. LED Lenser flashlights feature superior quality optics & use only the finest materials. LEDs are much brighter and have a longer life span than standard flashlight bulbs.. This makes blue and white LED's much more expensive than the other colours.
One fantastic thing about LEDs is how long they last. They have a lifespan of over 10yrs of continuous use. Usually are indicator lights.
The white LED torch provides a similar light output to its incandescent bulb counterpart yet uses far less current from the battery. They also draw a small amount of current, usually below 40 milliamps. Hand-held torch with 128 LEDs combine to generate an impressive light source.I am a bit of a torch freak, always looking for the brightest, smallest and most efficient models. They are far, far more powerful than they used to be and are now available in practically any colour under the sun, not just that grubby green colour on the front of your monitor. Let us shed a little light on the subject.
A single LED can produce only a limited amount of light, and only a single colour at a time.
LED's are usually used in consumer electronics.
The best luminous efficacy of an OLED so far is about 10% of the theoretical maximum of 683, or about 68 lm/W. To achieve the effect of white light, three approaches can be used: Wavelength Conversion, Colour Mixing, and most recently something called Homoepitaxial ZnSe. Now this torch uses Light emitting diodes (LED) instead of the more usual Bulbs. So the burning question is what the LED can do for me. Led technology represents one of # the most fascinating future light sources: it can be modelled in a thousand different ways, through colour and light intensity, ideal for both the industrial and architectural markets, for urban and many other applications. LED's for the most part run at low voltages usually between about 1 and 4 volts. Until recently white and blue light (the most practical colours) have been hard to produce. The light is also whiter than halogen or xenon bulbs, and the beam more usable, as makers often cluster several LEDs together to illuminate a wide area
LED's have changed dramatically over the past few years.
I was looking for a good torch to add to my tool collection, and after looking at the Maglite range with their LED conversion kits I found the Led Lenser. It should be noted that high-power (&Emergency Light Manufacturers

For years, traditional incandescent bulb flashlights have provided limited illumination, dark spots and lighting for only short periods of.
An LED is a special type of diodes that emit light when power is running through them. If you have looked around for a torch recently you will have noticed the Spotlight

The LED Torch has truly revolutionized portable lighting. LED Lenser flashlights feature superior quality optics & use only the finest materials. LEDs are much brighter and have a longer life span than standard flashlight bulbs.. This makes blue and white LED's much more expensive than the other colours.
One fantastic thing about LEDs is how long they last. They have a lifespan of over 10yrs of continuous use. Usually are indicator lights.
The white LED torch provides a similar light output to its incandescent bulb counterpart yet uses far less current from the battery. They also draw a small amount of current, usually below 40 milliamps. Hand-held torch with 128 LEDs combine to generate an impressive light source.I am a bit of a torch freak, always looking for the brightest, smallest and most efficient models. They are far, far more powerful than they used to be and are now available in practically any colour under the sun, not just that grubby green colour on the front of your monitor. Let us shed a little light on the subject.
A single LED can produce only a limited amount of light, and only a single colour at a time.
LED's are usually used in consumer electronics.
The best luminous efficacy of an OLED so far is about 10% of the theoretical maximum of 683, or about 68 lm/W. To achieve the effect of white light, three approaches can be used: Wavelength Conversion, Colour Mixing, and most recently something called Homoepitaxial ZnSe. Now this torch uses Light emitting diodes (LED) instead of the more usual Bulbs. So the burning question is what the LED can do for me. Led technology represents one of # the most fascinating future light sources: it can be modelled in a thousand different ways, through colour and light intensity, ideal for both the industrial and architectural markets, for urban and many other applications. LED's for the most part run at low voltages usually between about 1 and 4 volts. Until recently white and blue light (the most practical colours) have been hard to produce. The light is also whiter than halogen or xenon bulbs, and the beam more usable, as makers often cluster several LEDs together to illuminate a wide area