202071(水)

Detailed Use Of Corn Thresher

The wheat planter is an important tool in the implementation of protective tillage mechanization technology. It can complete multiple procedures such as stubble stubble, ditching, fertilization, seeding, soil covering, and suppression at one time, reducing the crushing damage of the machine to the soil, saving labor. Save time, save fertilizer and oil, increase production and income, and protect the environment. Whether the machine can be properly controlled and used will directly affect its function. In order to help the majority of farmers to correctly grasp the use characteristics of the machine and give full play to its high efficiency, the installation, adjustment and common use of the wheat no-till Seed Planter外部リンク The troubleshooting methods and operation notes are introduced as follows:
1. Installation of equipment
1. Installation of rotating tool. Each group of rotary cutters is composed of four left and right curved blades and two straight blades in the middle. During installation, the machete should be bent inwards with a center distance of 8cm and 16cm, and a straight knife with a center distance of 6cm. The rotating direction of the rotating blade shaft assembly is the same as the rotating direction of the tractor tire, so as to ensure that the blade edge enters the soil first. During the operation, the straight knife cuts the long straw, and the left and right machete throw the straw between the ridges. There is basically no long straw in the wheat ditch, which creates good conditions for wheat growth and development.
2. Installation of fertilizer and seed openers. During installation, it is required that the fertilization opener is in front and the seeding opener is in front and back, and the u-shaped card is fixed on the crossbeam with bolts. Adjust its up and down position according to agronomic requirements to ensure the depth of sowing and fertilization. Generally, the sowing depth is 3-4cm, and the depth of fertilization is 5cm below the seeds.
3. Installation of universal joint. The two ends of the universal joint have two different internal splines. Among them, the 8-38x32x6 internal spline is connected to the tractor's power output shaft external spline, and the 8-42x42x8 internal spline is connected to the machine's power input shaft. After installation, the two splined forks should be in the same plane.
Second, use and adjustment
1. Preparation and adjustment before operation
(1) Tightening and oil filling. Before using the machine, check the fastening parts and check whether the rotating parts are flexible. Fill the chain drive and other rotating parts with lubricant.
(2) Use of seeding (fat) device. The wheat no-tillage planter uses a semi-precision external groove wheel seeder. The sowing plate is drawn out during sowing. After sowing, the seeds are cleaned and pushed into the sowing plate.
(3) The limit of the suppression wheel. In the transportation state, the rocker arms on both sides of the suppression wheel are fixed by the two upper and lower limit pins on the fan-shaped plate; the upper limit pin must be released during the operation and placed in the appropriate hole on the fan-shaped plate.
(4) Adjustment of seeding (fat) device. Coarse adjustment: Loosen and adjust the lock nut of the hand wheel to make the ring gear withdraw from the meshing position, turn the seed volume adjustment hand wheel until the seed quantity indicator reaches the predetermined position, and then lock the nut. Fine adjustment: Suspend the suppressor wheel, rotate the suppressor wheel 10 times at a constant speed according to the normal driving speed and direction, take the seeds discharged from various tubes, weigh the weight of the seeds discharged from each row of tube and the total weight of seeding, calculate the Average seed volume and sowing volume per mu. When adjusting the sowing amount, the seeds (or fertilizer) in the seeding (fertilizer) sheave should be cleaned until it does not affect the movement of the sheave. In order to meet the agronomic requirements, it should be carefully debugged repeatedly. After adjusting, lock the nut.
(5) Horizontal adjustment of the left and right and front and back of the implement. Raise the implement, make the rotary knife and the opener leave the ground, adjust the rear left and right diagonal rods of the tractor to keep the blade, hook opener, and implement horizontal of the rotary knife; adjust the length of the upper rod in the tractor suspension device to make planting Keep the machine level front and back.
(7) Check the rotation clearance of Corn Thresher外部リンク. Before working, carefully check the relative position of the rotary knife and the opener so that it does not collide.



2020624(水)

Failure During The Use Of The Seeding Machine

   First, the planted seedlings are tilted in the direction of the Seeding Machine外部リンク's operation, or they do not maintain an upright posture after planting, but instead show a tilted state, what causes this?

In fact, the above reason is mainly because the position of the grid and the seedling guide tube may not be well contacted. If you encounter such an imagination, you must stop the machine and check whether there is a contact problem between the two. Be sure to close the distance between the two. Of course, you can also move the end of the seedling guide tube forward. If the situation does not improve, you must also operate the opener and move it forward. Until I adjust it.

   Second, the vegetable planter is unstable during the work, even slipping may occur.

   There are two main reasons for the above failure:

  ① It means that the sprocket and double-row chain are not very flexible when they are working. If the reason appears on the two, they must be cleaned to remove the dust and impurities above;

   ② There may be a certain gap in the rotating device, which causes the Rice Planting Machine外部リンク to be inconsistent when working. In such a case, the gap must be adjusted to an appropriate level.



2020617(水)

The Seed Planter Has An Important Role

The design of the Corn Thresher外部リンク due to the depression of the national economy has led to the development of the corn peeling machine. Due to the limited processing equipment and development capabilities, the development of the corn peeling machine has certain limitations, but with the industry With the improvement of the level, the development of corn peeling machines is becoming more and more advanced, and it is constantly developing in the direction of convenience and intelligence.
(1) Feeding part: The feeding part is composed of a feeding hopper and a feeding port. The corn cob is put into the body from the feeding part.
(2) Peeling part: The peeling part plays an important role in the corn peeling machine, which mainly includes peeling sticks, indenters, guide plates, etc. The corn on the cob is peeled by using the friction with the peeling stick through the indenter, and the peeled corn on the cob is discharged out of the body from the tail end.
(3) Frame part: The frame is an important component structure in the corn peeling machine and plays an important role in the peeling machine. It bears the main gravity, load and moment of the peeling machine. When designing the frame, it is necessary to strengthen its strength design and to have higher stability. The design of the frame material should use thicker angle iron.
The Seed Planter外部リンク of hognxiangsedders has good performance and the price is very affordable. We welcome you to leave us a message, I believe we will not let you down.



2020610(水)

Rice Planting Machine Should Avoid Malfunction

The planter accessories work very efficiently in arable land operations, so the Rice Planting Machine外部リンク accessories are easily damaged. We must regularly maintain the rice planter accessories.

1. Before we use the rice planter, we should have a simple and comprehensive understanding of the principle of all rice planter accessories, as long as the maintenance is done on the spot, it is effective, so as to ensure the use of rice planter accessories Only longevity can we reap more economic benefits.

2. Maintenance of rice planter accessory rack. Most of the accidents that occur in the rack are bent. These reasons are mainly because people are working on the rice planter accessories. These reasons will cause damage to the rack, so we should avoid when using the harvester Work in an overloaded working state.

3. Among the parts of rice planter parts that are relatively easy to damage are nylon, cast iron, steel parts and cast iron parts, the replacement frequency of these parts is relatively high. Therefore, we avoid early scrap when using it, so we should always pay attention to the cleanliness of the rice planter accessories when using the harvester to avoid sand or large dust falling into the rice planter.

The Seeding Machine外部リンク parts must be regularly maintained during use, to avoid the failure of the rice planting machine parts during the cultivation operation, and the big loss due to small.



202063(水)

Modification Knowledge Of Knapsack Fertilizer Machine

Sometimes buying a Manual Corn Seeder外部リンク for home will not be able to achieve the actual effect you want. If you know the professional knowledge of the commodity and can carry out the modification yourself, we will introduce the professional knowledge of these aspects for everyone.
In some commercial ground wheels, the two rolling bearings are transitionally matched to the two hole walls of the wheel frame, and the through shaft type is used. The disadvantage is that the ground wheel must be hit with a hammer when disassembling the common faults. It is troublesome to disassemble and endanger the service life of the rolling bearing. It is much more convenient to replace the rolling bearing and repair the ground wheel after changing to the clamp type. Some commercial knapsack fertilizer machines use hard plastic raw materials to produce vacuum chambers. Despite the advantages of low cost and small quality, the components of the transmission system on both sides of the knapsack fertilizer machine are metal composite materials, which are likely to cause the vacuum pump chamber to deform and leak during operation. Steam, which in turn harms the vacuum value in the vacuum pump room. It would be unexpected to be able to try to select forged iron to produce a vacuum chamber. Some piggyback fertiliser transmission systems use the drive force typed in a series from one side. When a certain group of piggyback fertilisers encounter common failures, they will endanger the work of other piggyback fertilisers. After changing the overall series transmission system to a single sprocket to test the series transmission system, the working quality will be greatly improved. Ventilation ducts made of hard plastic raw materials connected to each other from the centrifugal fan to the Knapsack Fertilizer Machine外部リンク look very messy, and exposed to the outside often endanger their service life due to wear and aging. The load-bearing beams dominate the connection of the air ducts, which not only reduces the sense of clutter, but also avoids the aging of the air ducts and facilitates installation.



<<
>>




 ABOUT
hongxiangseeder

性別
属性個人
 カウンター
2020-04-25から
331hit
今日:1
昨日:1


戻る