2021223(火)

China Elevator Lifts Factory

China Elevator Lifts Factory

With the continuous improvement of people's living standards, people rely on cars when they go out, and use elevators up and downstairs. Passenger elevators have also become an important part of our lives. However, elevator accidents are not uncommon in daily life, which greatly increases everyone's attention to elevator safety. Below,China Elevator Lifts Factory will introduce how to choose a passenger elevator with higher safety performance:

1. Choose a good passenger elevator brand
When purchasing, you must choose the elevator brand. The technical advantages of a good brand are more obvious, and the maintenance ability is more trustworthy. When making specific purchases, you can combine the opinions of some industry experts and the actual products on the market, installation, post-maintenance usage, and customer reputation.

2. Whether the elevator can be installed as required
Many problems with elevators are directly related to the installation quality and later maintenance. Especially the installation quality has hidden dangers, it is difficult to re-adjust, and later maintenance and adjustment are even more difficult. Therefore, whether the strict installation process can be carried out by the requirements of the elevator manufacturer is also a detail of the elevator brand to improve the safety performance of the elevator.

3. Whether it can provide perfect service
First of all, elevator manufacturers must guarantee the quality of their products, just like Xizi KONE Elevator has been practicing the mission of "carrying life and creating a better life" with its strength; secondly, it must pay attention to the level of installation and debugging technology, which requires after-sales The continuity of service work requires manufacturers to pay enough attention to product after-sales service, and a professional maintenance team is required to be available 24 hours a day. This is enough to ensure the company’s rapid response time; subsequent maintenance management needs to be reasonable and timely. A certain degree of professional knowledge and a sense of responsibility is required, and of course, technical support from the manufacturer is indispensable.

Through the above introduction, China Passenger Elevator Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.fujihsed.com/



2021112(火)

China Elevator Lifts Factory Share How To Maintain Elevator

Elevators are very common in our daily life, but occasionally we also see that many people in the news have lost their lives because of elevator accidents. Elevator accidents are also a frequent occurrence, so it is very important for the passenger elevator's safety protection door. Can well protect our lives. Today, China Elevator Lifts Factory will introduce the safety measures for elevator protective doors.

1.Set warning words
The construction elevator protective door has simple structure, reliable quality, convenient installation and use, and can be reused. It is made of rectangular tube and expanded metal (welded mesh) and steel plate. The welding point is firm. The steel is made of national standard Q235. Commonly used dimensions are 1.3m * 1.8m or 1.5m * 1.8m. The surface is sprayed with yellow or red paint, and the bottom is sprayed with black and yellow or red and white skirting boards. There is a warning slogan in the middle that says "Pay attention to safety and close the door", which makes the scene clear. Haoqian elevator protection door is constructed strictly according to the drawing, with correct dimensions and meticulous workmanship, to achieve the purpose of construction safety protection.

2.Material is safe and reliable
Generally, the elevator protective door uses yellow paint, and the bottom is sprayed with yellow and black skirting boards to achieve the purpose of warning. The door frame is welded by the national standard 2 * 3cm rectangular tube (the rectangular tube can be customized according to customer requirements). It has high strength, does not desolder, and has stable quality. The door bolt adopts galvanized complete door bolt, which is beautiful in appearance and easy to use. The door bolt can only be opened by the elevator operator to prevent the construction workers waiting on the floor from opening the protective door. Eliminate the potential risks of parabolic or falling objects at high altitudes.

3, the first safety net protection
The first safety net of the elevator wellhead must be set on the plus and minus zero floors. The upper part of every two floors is designed with a safety flat net every 10m. The quality of network safety must be consistent with the standard network of GB5725-1997 "Safety Net". Regulations. Installed on the safety flat-net elevator for disassembly, operators should wear safety belts according to regulations. On the floor and roof, a hole with a short side size greater than 1.5 m should be provided around the hole with the same requirements for protective railings, and a flat safety net should be set at the bottom.


Through the above introduction, Passenger Elevator Factory Manufacturers hopes that you can simply refer to the content of this article in future use.



20201215(火)

Observation Elevators Supplier

When we are in the process of actual installation of home micro elevators, we may be most concerned about the installation standards of the entire elevator. From the current situation, such an elevator is in the process of installation, Observation Elevators Supplier introduced What are the standards for installing elevators?



Elevator space through the whole line
In the actual installation process of the household micro-elevator, according to the difference of the existing installation positions, the interior of the elevator must be installed in the middle of the indoor stairs, and the installation must be carried out in the elevator shaft of the civil engineering or the place where it is attached to the wall. No matter where it is installed, there must be a numerical full-through indoor space. When all the agencies cut concrete, they must be installed under some small household elevators. Generally speaking, we are installing at the same time. You must pay special attention. In many cases, the communication between the owners of the community or the construction management team of the project is not particularly good. In this case, various situations may occur during the installation of the home micro-elevator, so we are doing Be sure to learn more about the actual installation.


The pit must be pre-buried
In the actual installation process of household micro elevators, all elevator installations can be installed in high-rise residential-style buildings in addition to the actual installation in traditional single-family villas. When we want to install Be able to analyze the natural environment of resistance in-depth, and make sure to do a convenient and flexible installation during the installation process.



2020128(火)

China Elevator Lifts Factory Introduces What Is A Freight Elevator

The simple circuit problems of the mobile freight elevator can be simple faults such as poor line contact and loose joints. The following China Elevator Lifts Factory lists some of the circuit problems and solutions for mobile freight elevators:

1. When using the voltage file to detect the mobile freight elevator, it is necessary to connect the power supply, and then measure the voltage according to the circuit schematic diagram, and determine and analyze the fault point through the measured voltage value. When using the resistance file to check, you need to disconnect the power supply, and then measure through the circuit schematic diagram, and analyze the fault point according to the measured resistance value. On-site maintenance personnel should be available when inspecting the circuit to prevent unauthorized opening and closing of the switch when inspecting the circuit, which may cause a safety accident.

2. When using a universal meter to check the failure of the mobile elevator freight elevator, the resistance and voltage files can be used for detection. When checking with the short-circuit method, you can use the control principle diagram of the mobile lift freight elevator as the basis to short-circuit the possible faulty contacts, switches, etc. After the short-circuit, if the fault is eliminated, the fault is in this part. After narrowing the scope, check again to know where the fault is.

Through the above introduction, China Passenger Elevator Manufacturers hopes that you can simply refer to the content of this article in future use.



20201124(火)

China Home Elevator Factory Introduces Which Parts Need Maintenance

After the home elevator is used, it needs regular inspection, so let's follow China Home Elevator Factory to see which parts need to be inspected:

High-end home elevators do not require mandatory acceptance, but the time interval for comprehensive inspection of home elevators should not exceed 12 months, especially regarding the effectiveness of the following items:

Door lock device electrical safety device; grounding continuity; support and suspension system; drive device and brake; device to prevent free fall and overspeed descent, alarm system; door protection device; inspection of the inner surface of the hoistway; guide rail and guide shoe; lighting and Emergency lighting

Through the above introduction, Bed Elevator Manufacturers hopes that you can simply refer to the content of this article in future use.



<<
>>




 ABOUT
huzhoufuji

性別
属性個人
 カウンター
2020-04-17から
540hit
今日:1
昨日:1


戻る