2020916(水)

Sensor Led Street Light Housing Supplier

Sensor Led Street Light Housing Supplier introduces what is a wall lamp?
As the name suggests, it is the same tool that is placed on the wall for lighting. The power of the bulb is about 15-40 watts. Its light is elegant and harmonious, which can enhance the indoor environment with an elegant and rich feeling, thereby creating a warm atmosphere . There are many types and styles of wall lamps, such as ceiling lamps, color-changing wall lamps, bedside wall lamps, and mirror wall lamps. And the height of the wall lamp is worthy of consideration.

Under normal circumstances, the height of the wall lamp should be slightly higher than the eye level of our eyes, about 1.8 meters from the ground to the wall lamp. This position is more suitable. It must not be less than 1.8 meters. Strictly speaking, the height of the bulb from the ground must not be less than 1.8 meters, otherwise it cannot be called a wall lamp. There is no function that the wall lamp should have.

The height of the wall lamp in the room can be slightly lower than the height of the wall lamp in the living room. It is better to set it in the range of 1.4 meters to 1.7 meters. If there are babies and young children at home, pay attention to the height of the bedroom wall lamp. It should be within the reach of children when they are playing on the bed. Otherwise, it would be bad for the baby to be dangerous.

The wall lamp height problem is solved, so the big guy knows how far the wall lamp protrudes from the wall? Tell everyone that the distance between the wall lamp and the wall is about 9 cm to 40 cm, but you don't need to be too constrained on this point, because it generally depends on the style of the wall lamp you choose.

The above content is organized and shared by LED Street Light Housing | Die-cast Aluminum Light Housing Manufacturer, hoping to help those in need.



202099(水)

Hot-Selling Street Light Housing Manufacturer

Hot-Selling Street Light Housing manufacturer introduces the basic dimensions of street lights

The basic size of the street lamp should be matched with the lamp pole:
The foundation of the street lamp is also called the embedded part, which is used to fix the lamp pole. Before installing the lamp pole, make the foundation first, dig a hole in the position of the street lamp, bury the foundation in the ground, and pour it with cement. After a week Can be used.

Pay attention to the installation direction of the basic dimensions of the street lamp:
When the foundation is embedded, one of the sides should be parallel to the roadside. When pouring the cement, pay attention to the stability of the foundation. Remember not to deform the foundation, otherwise it may not be installed when installing the street light pole. The length of the foundation is generally in the street light 1/10 of the height of the pole, the length is the flange side length divided by 1.414. Reserve a length of about 10 cm at the top of the foundation, and machine the threads to facilitate the installation of the street lamp with screws.

The above content is organized and shared by LED Street Light Housing | Die-cast Aluminum Light Housing manufacturer, hoping to help those in need.



2020826(水)

Sensor Led Street Light Housing Supplier

Sensor Led Street Light Housing supplier introduction LED street light is mainly composed of LED street light lamp housing, LED street light source and LED street light driving power supply. The assembly steps of LED street light mainly include fixing welding light source, fixing driving power supply and assembling street light lamp housing. After assembling a complete LED street light product, we have to conduct a series of inspections on it, including the aging test of the LED street light.

Manufacturers must go through the process of street lamp aging line in the production process of LED street lamps, and the quality of LED street lamps can be guaranteed by passing the aging test within the standard time. The led street lamp aging line tests the led street lights, and finds bad phenomena such as dead lights in time, thereby improving various unqualified indicators, improving the lighting quality of the led street lights and the lighting life of the led street lights.

The above content is compiled and shared by the LED Street Light Housing | Die-cast Aluminum Light Housing manufacturers , hoping to help those in need.



2020819(水)

100w Street Light Housing Manufacturer

When buying LED lighting, 100w Street Light Housing manufacturer reminds that the quality of the lamps is the main reason. The lampshade of LED lighting is usually made of glass, and the bracket is usually made of metal.

Is it correct that the lampshade of LED lighting mainly looks at the light? Appropriately, the appearance and personality of pictures and colors may be the echo of all rooms. The light of LED lighting is usually very soft, the degree must be less than 62 watts. For example, choose different types of LED lights. Another: single-head LED wall washer if the room is small according to the equipment requirements, or double-room LED wall washer, you can choose some thick LED wall lights; otherwise, choose a thinner one. Finally, it is worth noting that the best choice for lighting protection covers LED wall lights, which can avoid the risk of light wallpaper.

The above content is compiled and shared by LED Street Light Housing | Die-cast Aluminum Light Housing manufacturer , hoping to help those in need.



2020813(木)

Sensor Led Street Light Housing Supplier Shares Battery Knowledge

LED street lights are made up of five main components: lamp post, light source, battery, solar panel and controller. It is a semiconductor based on the formation of PN junction with weak electrical energy can be a high-efficiency solid-state light source, in a certain forward bias voltage and injection current, injected into the P area of the hole and injected into the N area of the electron in the active area after diffusion to the radiation composite and emit photons, the electrical energy will be directly converted into light energy. It also needs accessories such as cages, wires and solar panel brackets, etc. LED street lights it is a semiconductor based PN junction formation with weak electrical energy can be luminous efficient solid-state light source, in a certain forward bias voltage and injection current, injected into the P area of the hole and injected into the N area of the electron in the active area after diffusion to the radiation compound and emit photons, the electrical energy is directly converted into light energy. To know if the quality of LED street lights is good, Sensor Led Street Light Housing suppliers teach you to judge LED street lights by their poles, panels and batteries, as well as their light source and controller light components.

1.LED street light poles: LED street light poles are divided into hot galvanized and cold galvanized. Anti-corrosion: hot dip galvanizing is dozens of times more effective than cold dip galvanizing; hot dip galvanizing is the immersion of the entire LED light pole in a 450-480 degree hot galvanizing solution; cold dip galvanizing is the plating of the light pole at room temperature; thickness of the galvanized layer: the thickness of the hot galvanized LED light pole is much greater than that of the cold galvanizing; appearance of the finish: the cold galvanized light pole is smoother and more beautiful than the hot galvanized light pole; adhesion: the cold galvanized light pole has less adhesion than the hot galvanized light pole. Hot-dip galvanized molded products must be used for lead light poles. Although the price of the entire hot galvanized molded LED light pole is much higher than that of a cold galvanized pole, it is cost effective in terms of practical application and service life.

2. solar panels: the quality of LED street light solar panels can be seen with the naked eye. We can check the sealing of the panels, the details of the workmanship, as well as the thickness of the tempered glass and the quality of the aluminum frame, but the power of the solar panels can only be checked by instruments. In order to save costs, some unscrupulous merchants use inferior steel glass and thin aluminum frames for solar panel fixtures. This kind of street light solar panels are easily damaged during transportation, not easy to encounter hail and rain during use, so be careful when choosing solar panels. There are also unscrupulous companies that use poor batteries, low conversion efficiency, poor power generation and quality, and the possibility of batteries without voltage after a period of use. We have to pay attention to these when buying solar panels.

3. Battery: LED (light-emitting diode) street lamp battery needs to choose a high-quality lithium battery or colloidal battery, with a certain capacity of the battery has a corresponding weight, can be used for the LED (light-emitting diode) street lamp battery weighing, the weight difference is too big to choose. The battery has any manufacturer's name and capacity label on the surface.

4.LED light source: LED street lights use LED beads light efficiency is very important. While some LED light beads can reach a certain wattage, they often do not achieve light efficiency. When choosing, should choose LED light beads, good light beads can improve light efficiency, reduce light decay, and have high color rendering.


The above content is organized and shared by LED Street Light Housing | Die-cast Aluminum Light Housing ,hoping to help those in need.



<<
>>




 ABOUT
ninghaiyuchen

性別
属性個人
 ブログカテゴリ
 カウンター
2020-04-23から
747hit
今日:1


戻る