202077(火)

Floating Platform Boat Pontoon Manufacturers

Buoys are widely used in the landscape of water conservancy projects, but the installation of buoys has many details. With years of experience, the following manufacturer of Floating Platform Boat Pontoon will introduce the installation method of floating pontoon.

1. The single buoys are spliced ​​together according to the design drawings to form a whole.

Second, the floating earrings overlap to improve the wave and torsion resistance of the dock, and are combined in order according to the order of the points on the position of the earrings on the surface of the float. The buoys are connected and locked with short pins. Use special tools to rotate 45 degrees to complete the tenon position. The outer tightening bolts are fastened to the outer ring side. The washers are installed according to the buoy position. Other buoy products are extended and assembled in this way. It can form a floating platform of any shape and any size, its disassembly and assembly are simple and convenient, the assembly is flexible, the shape is diverse, and the structure is solid.

The above content is organized and shared by the Boxing Training Heavy Free Standing Punching Bag manufacturer, hoping to help those in need.



2020630(火)

Floating Pontoon Dock Manufacturers Share The Use Of Sandbags

Floating Pontoon Dock manufacturers share sandbag usage:

1. Move the pace around the sandbag, shake your body, don't use your body's strength to hit the punch when you hit the sandbag, click it, click it, don't use too much force, whether it is jabber or uppercut , Standardize your movements, and experience the right focus.

2. When punching, when the punch is about to touch the sandbag, the wrist should be tight, the fist should be tight, and the face should be flat. Shoulder, elbow, and wrist joints are fully relaxed when hitting the sandbag with a wrestler and a pull. Before the exercise, the finger joints should be hot, before they can be beaten, or they can be dropped or pumped with a sandbag. After the fingers heat up, they must be hit hard.

3. The position of the fist, in addition to the fist surface should be flat, but also slightly inward, so that the fist and the forearm are integrated, so that even if the fist is not fully clenched, it will not contusion.

In addition, the contact point is the fist peak, and then the fist surface. When contacting the sandbag, do not change the angle of the fist and forearm in order to allow the fist surface to completely contact the sandbag. If the training intensity is high, it is recommended to use sandbag gloves (you can replace it with ordinary ankle brace, wear your thumb through the hole in the middle of the ankle brace).

4. When the inertia caused by the shaking of the sandbag hits you, don't use force to hit the punch, because your wrist is not enough to support the power of the rebound, it is easy to cause injury to your wrist.


The above content is organized and shared by the manufacturer of Floating Platform Boat Pontoon, hoping to help those in need.



2020623(火)

Floating Pontoon Dock Manufacturers Share Tips For Using Floats

Floating Pontoon Dock manufacturers introduces that the pipeline buoy is generally a hollow long cylinder made of stainless steel, suspended vertically in the measured medium, the mass is greater than the same volume of liquid weight, the center of gravity is lower than the geometric center, so that the buoy is always upright It is not affected by the height of the liquid. It has minimal displacement during measurement and will not float on the liquid surface, so it is also called sinker. The float is suspended at one end of the lever. The other end of the lever is vertically connected to the end of the torsion tube core shaft. The torsion tube The other end is fixed on the instrument shell. The torsion tube is a sealed output shaft. On the one hand, it can separate the measured medium from the external space; on the other hand, it can use the elastic torsional deformation of the torsion tube to turn the torque acting on the end of the torsion tube into a mandrel. Angular displacement (rotation). The buoy type liquid level gauge does not need a shaft sleeve, packing, etc. for sealing, so it can measure the liquid level in the pressure vessel.

The pipeline buoy is safe and stable, and the anti-skid design on the surface of the engineering buoy saves people from the common dangers of common wooden installations (no broken wood chips and rust nails, etc., and the four corners of the buoy are designed with arcs and obtuse angles, which is safe and stable). Plastic pontoons are versatile and can be widely used in various fields. The bearing capacity is strong, the barrel is stable and durable, and a single can provide 500kg buoyancy. The service life of this product is more than 15 years. Except for strong natural forces and artificial improper use, there is no need to spend any maintenance or repair costs. The assembly is simple, fast and flexible, and the circular and semi-circular structure can be laid with various pipes. The construction cost is reasonable and economical. From a long-term perspective, it can save a lot of cost and time for maintenance, repair, replacement and overhaul. Beautiful shape, the surface of the float can be sprayed according to your specific use requirements.

The pipeline buoy is made of imported linear low-density polyethylene raw material, which is formed by rotomolding process at one time. It has no welding seam and is durable. The main thing is that the imported PE material is non-toxic and odorless, and will not pollute the breeding water quality. The service life of this product is more than 15 years. Except for strong natural forces and artificial improper use, there is no need to spend any maintenance or repair costs; the cost is reasonable and economical. From a long-term perspective, it can save a lot of maintenance, The cost and time of maintenance, replacement and repair; beautiful appearance, the surface of the float can be sprayed according to your specific use requirements. Economical and low maintenance costs. Easy to assemble and disassemble: can be installed and removed quickly and easily. Light weight and great buoyancy. Resistant to impact, acid and alkali corrosion. Low absorption rate, simple construction, low maintenance cost, temperature range -60-80℃.

The above content is shared and organized by the manufacturer of Boxing Training Heavy Free Standing Punching Bag , hoping to help those in need。



2020623(火)

Floating Pontoon Dock Manufacturers Share The Use Of Plastic

Below, the Floating Pontoon Dock manufacturer shares the advantages of plastic:

1. Light weight
Plastic is a lighter material with a relative density distribution between 0.90-2.2. Obviously, can the plastic float on the water? Especially foamed plastics, because of the micropores inside, the texture is lighter, and the relative density is only 0.01. This characteristic makes plastics useful in the production of products that require reduced weight.

2. Excellent chemical stability
Most plastics have good corrosion resistance to chemicals such as acids and alkalis. Especially the polytetrafluoroethylene (F4) commonly known as plastic king, its chemical stability is even better than gold, and it will not deteriorate after being cooked in "aqua regia" for more than ten hours. Because F4 has excellent chemical stability, it is an ideal corrosion-resistant material. For example, F4 can be used as a material for transporting corrosive and viscous liquid pipelines.

3. Excellent electrical insulation properties
Ordinary plastics are poor conductors of electricity, and their surface resistance and volume resistance are very large, which can be expressed by numbers up to 109-1018 ohms. The breakdown voltage is large, and the dielectric loss tangent is very small. Therefore, plastics are widely used in the electronics industry and machinery industry. Such as plastic insulated control cables.

4. Poor thermal conductor, with noise reduction and shock absorption
Generally speaking, the thermal conductivity of plastic is relatively low, which is equivalent to 1/75-1/225 of steel, and the micropores of foam plastic. It contains gas, which has better heat insulation, sound insulation and shock resistance. For example, the thermal conductivity of polyvinyl chloride (PVC) is only 1/357 of steel and 1/1250 of aluminum. In terms of thermal insulation capacity, single glass plastic windows are 40% higher than single glass aluminum windows and 50% higher than double glass. After combining the plastic form with the hollow glass, it is used in residences, office buildings, wards, and hotels. It has obvious benefits in saving heating in winter and air-conditioning expenses in summer.

5. Wide distribution of mechanical strength and high specific strength
Some plastics are as hard as stone and steel, and some are soft as paper and leather; from the mechanical properties of plastics such as hardness, tensile strength, elongation and impact strength, they have a wide distribution range and have a lot of choices. Because plastic has a small specific gravity and high strength, it has a high specific strength. Compared with other materials, plastic also has obvious shortcomings, such as easy to burn, stiffness not as high as metal, poor aging resistance, heat resistance, etc.

The above content is shared and organized by the manufacturer of Floating Platform Boat Pontoon , hoping to help those in need。



2020616(火)

Floating Dock Plastic Pontoon Manufacturer

The function of the Floating Dock Plastic Pontoon manufacturer to share the impact protection equipment is to partially absorb the huge impact energy generated when the ship is docked to reduce the impact force on the dock and prevent the ship and dock from colliding and abrading each other. Therefore, the anti-shock equipment must have sufficient strength, elasticity and wear resistance, and must have a certain durability, as well as easy to disassemble and repair.
The main type of anti-surge equipment is the fender. There are handguards and rubber fenders.

The fender structure is generally fixed and floating, mostly fixed. The fender is divided according to the material. The fender is made of tough, elastic and corrosion-resistant wood. Due to the characteristics of the wood, its anti-collision effect is not ideal; as the ship becomes larger and the construction of an open dock, the ship docks The impact energy generated by the time is getting larger and larger. In order to reduce the impact force on the dock, the rubber fender is more and more widely used.
There are two main types of rubber fenders: compression type and inflatable type. The former undergoes its own compression and shape changes after being stressed, while the latter is mainly internal gas compression, and the former is widely used at present.

A few of the Is l-type, solid-type and simple-match under compression rubber fenders are commonly used in cylindrical, semi-circular, arched and drum-shaped, and there are also type fenders.
The inner diameter of the fire hose should meet the water output of the required water column, and it should not be less than 50mm. The fire hose can be used for washing the wharf and spraying water in addition to the water delivery during fire fighting.
The number and arrangement of fire hydrants on the wharf shall meet the design requirements of the fire department. Each fire hydrant shall be composed of an internal snap connector suitable for connecting the fire belt, a globe valve and a protective cover. Internal snap fittings and globe valves should be made of copper alloy or other materials that are resistant to fire and corrosion. Fire hoses and water guns should be made of canvas or other suitable materials. Dangerous goods docks shall be equipped with spray water guns or water spray and spray water spray guns.

The above content is organized and shared by the Floating Platform Boat Pontoon manufacturer, hoping to help those in need.



<<
>>




 ABOUT
taizhouglejin

性別
属性個人
 カウンター
2020-04-08から
434hit
今日:1
昨日:1


戻る