2021223(火)

Awning Motors Manufacturer

Awning Motors Manufacturer

Awning Motors Manufacturer introduces daily guidelines for pump maintenance:


1. Daily maintenance and maintenance of the water pump: daily maintenance.
a. Check the water pump power cord for aging, broken skin, and leakage of the copper core of the power cord. In this case, if the power cord is on the shore, it can be wrapped. If it is in water, it is best to replace the power cord.

b. Frequently check whether the water pump impeller has mud, foreign matter, etc. that block the water outlet impeller or the water outlet, and check whether the sound of the water pump is good when it is running.

c. Check whether the water pump is running or not leaking electricity. If there is electricity leakage, please send it to the water pump maintenance department to overhaul the national standard motor.


2. How to deal with the abnormal noise of the pump: There are three reasons for the abnormal noise.
a. The water pump bearing is damaged and needs to be replaced.
b. The impeller of the water pump is loose and grinds to the bottom end cover of the water pump.
c. Damage to the water pump coil.

3. The water pump cannot supply water normally after starting: there are four reasons why the pump cannot supply water normally
a. Is the water pump a centrifugal pump. Is it necessary to divert water?
b. Whether the pump is reversed, if it is reversed, replace the capacitor connection method.
c. Whether there is foreign matter in the water outlet of the pump or the gap of the impeller.

4. Whether the water pump seal is installed properly.

Through the above introduction,Alexa Controlled Blinds Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.wistarmotor.com/



2021119(火)

Awning Motors Manufacturers

Awning Motors Manufacturers introduces that single-phase asynchronous motors are composed of stator, rotor, bearing, casing, end cover, etc.

The stator consists of a base and an iron core with windings. The core is made of silicon steel sheet punched and laminated, and two sets of main windings (also called running windings) and auxiliary windings (also called starting windings as secondary windings) with a space of 90° electrical angles apart are embedded in the slots. The main winding is connected to the AC power supply, and the auxiliary winding is connected to the centrifugal switch S or the starting capacitor, the running capacitor, etc., and then the power supply.

The rotor is a cage-type cast aluminum rotor. The core is laminated with aluminum and cast into the slot of the core, and the end rings are cast together to short-circuit the rotor bar into a squirrel cage.

Single-phase asynchronous motors are divided into single-phase resistance-start asynchronous motors, single-phase capacitor-start asynchronous motors, single-phase capacitor-running asynchronous motors, and single-phase dual-value capacitor asynchronous motors.



2021112(火)

Smart Curtain Motor Manufacturers Introduces How To Use Smart Curtains

Smart Curtain Motor Manufacturers introduces what are the functions of smart curtains?

The occasions where smart curtains are used are hotels, because hotels need to provide people with advanced and comfortable products. But why is it now a spare part of the family? Or because of its practicality, and now because of the emergence of competitors, the price has been slowly falling, making it affordable for ordinary users.

1. The convenience of smart curtains

The so-called convenience, not only does not need to open and close the curtains, but also can directly control the curtains through voice or mobile phone. You can directly install the products provided by our company to ensure that your curtains can be directly controlled by voice. If you forget to close the curtains when you go out, that's okay, because the smart curtains can be closed remotely via your mobile phone, so you can even go far away without worrying about the situation at home.

2. The beauty of smart curtains

In fact, for villas, curtains need to be beautiful, which can make the whole room look tall. Nowadays, curtains can be matched with curtain fabrics on the market. You can choose whatever you want. Also, due to the height of the windows, attention should be paid to the cleanliness and beauty of the curtains. Smart curtains ensure the beauty of colleagues and the cleanliness of the curtains. The lifting curtain is so considerate to the user.

Through the above introduction, Motorized Shades Blinds Manufacturers hopes that you can simply refer to the content of this article in future use.



20201216(水)

Smart Curtain Motor Manufacturer

Smart Curtain Motor Manufacture introduces the installation steps of electric curtain track:

1. Positioning line

(1) The accuracy of line positioning is the key to the track of the window sill. The first is to measure the ratio of the fixed hole distance to the track of the equipment. The good ratio of the customer should be the total length of the track, and the total length of the track is the main gearbox, the track The sum of the length and the auxiliary gearbox,

(2) The curved track can form a zigzag curved curtain track according to the curvature of the building, the arc is not less than 120 degrees,

2. Lifting clip

(1) First, rotate the fixture 90 degrees to connect it with the track, and use self-tapping screws to install the lifting clip on the top plate. If it is a concrete structure, you need to add expansion wires, motor wires, motor and track connections,

(2) Put the electrical 90° into the main gear box, the flat rotating shaft of the main gear box should match the motor interface, and then rotate the motor 90 clockwise. After rotating it in place, push the blade into the gear box, and the direction will be actively locked. The motor will be connected to the gearbox,

3. Motor and track connection

Put the electric 90 degrees into the main gearbox, rotate the motor 90 degrees clockwise, after rotating, push the blade into the gearbox to the limit position, it will be actively locked, and the motor will be connected to the gearbox.


4. Motor program adjustment

(1) A set of gears and micro switch devices are installed at the end of the motor. The motor wiring must be positive and negative, and then open the window cloth to complete the self-positioning of the closing stroke.

(2) The installation procedure of the electric curtain track is complicated. If you can ask the owner to install it, it is best not to start it yourself, so as not to damage the window cloth motor and other accessories and cause unnecessary losses.


Through the above introduction, Motorized Shades Blinds Manufacturers hopes that you can simply refer to the content of this article in future use.



20201124(火)

Motorized Shades Blinds Manufacturers

Electric roller blinds are similar to jalousie curtains. They have also begun to be used in other indoor decorations, but now they are more and more used in the soft decoration of the room. In soft decoration, more and more people are now willing to use electric roller blinds to decorate their new houses. Motorized Shades Blinds Manufacturers introduced that electric roller blinds are characterized by strong mobility, shading, and resistance to aging. What are the fabrics used for electric roller blinds?

1. Sunshine fabric: The common fabric is made of polyester and PVC, which is woven by a special method. There are pinhole-like small eyes on the fabric. It is named because part of the sunlight can transmit light. The fabric is suitable for general office places. The light-transmitting sunlight fabric roller blind can see the outdoor scenery and can effectively block ultraviolet rays. It is widely used in office environments. Due to the particularity of the fabric material, it is generally fire-retardant fabric.

2. Semi-shielding fabric: it can block the eyes, you can't see the indoor and outdoor scenes, but there is light. It is the most common semi-shading fabric, which can effectively block ultraviolet rays, but its light transmittance is slightly worse than that of sunlight fabrics.

3. Full shading fabric: it can be divided into white coating full shading, silver coating full shading, non-coating full shading, etc. It is suitable for places with strong sunlight, or environments that need to be completely dark, such as bedrooms and video conference rooms, windows facing the street, and other environments. Because of its good shading and heat insulation effect, it is also one of the most common choices for office curtains.

Through the above introduction, Smart Curtain Motor Manufacturers hopes that you can simply refer to the content of this article in future use.



<<
>>




 ABOUT
wistarmotor

性別
属性個人
 カウンター
2020-10-14から
211hit
今日:1


戻る